The plant cell pressure probe

The pressure probe is a micro manometer for the simultaneous direct recording and manipulation of plant cell hydrostatic pressure. It is used to map in space and time the turgor pressures of individual cells within tissues and organs of intact plants. This is used to study the hydraulic architecture of tissues, tissue movement and the responses of tissues to water stress. The approach can be augmented by simultaneous measurement of individual cell osmotic pressure. This permits the hydraulic driving forces across selectively permeable membranes and walls to be assessed fully. By manipulating manually the pressure, cell wall elasticity and its properties can also be mapped. Under some conditions this can be extended to plastic behaviour.     

Influence of surface anesthesia on the pressure pain threshold measured with different-sized probes

Transcutaneous pressure with pressure probes of arbitrary diameters have been commonly used for measuring the threshold and magnitude of muscle pain, yet this procedure lacks scientific validation. To examine the valid probe dimensions, we conducted physiological experiments using 34 human subjects. Pin-prick pain, pressure pain threshold (PPT) to pressure probes of various diameters, heat pain threshold, and electrical pain threshold of deep tissues were measured before and after application of surface lidocaine anesthesia to the skin surface over the brachioradial muscle in a double-blinded manner. The anesthesia neither affected PPT with larger probes (diameters: 1.6 and 15?mm) nor increased electric pain threshold of deep structures, whereas it diminished pain count in pin-prick test and PPT with a 1.0?mm diameter probe, suggesting that mechanical pain thresholds measured with 1.6 and 15?mm probes reflect the pain threshold of deep tissues, possibly muscle. Pain thresholds to heat did not change after application of the anesthesia. These results suggest that larger pressure probes can give a better estimation of muscular pain threshold.     

Cellulose depolymerization to glucose and other water soluble polysaccharides by shear deformation and high pressure treatment

The simultaneous action of shear deformation and high pressure (SDHP) creates changes in the structure of wood and its main components (cellulose, hemicelluloses, lignin). The formation of water and alkali soluble polysaccharides under SDHP action, proceeds in seconds in the solid state, without the use of any reagents and solvents. Therefore, SDHP seems to be a technologically safe method and friendly to the environment. The amorphization of cellulose crystallites and depolymerization of cellulose chains were observed under a wide range of pressures (1–6 GPa), both for cellulose samples and the cellulose part of wood. Similar depolymerization occurs in the hemicellulose part of wood. The decomposition of polysaccharides under SDHP causes the formation of the water soluble part, whose content increases with pressure and the applied shear deformation. A maximum solubility of 40% and 55% was registered at 6 GPa following treatment of cellulose and birch wood samples. A higher output in the case of wood can be explained by a specific role of lignin under SDHP, which acts as a ‘grinding stone’ during cellulose and hemicelluloses destruction. As shown by high-performance size exclusion chromatography, the water soluble fraction obtained from cellulose contained glucose (2.6%), cellobiose (9.6%), cellotriose (16.6%) and other higher water soluble oligomers (71%). Almost complete dissolution (98%) of the treated cellulose sample can be achieved by extraction with 10% NaOH solution. The SDHP treated birch wood was subjected to submerged fermentation (with Trichoderma viride), and a 13% output of proteins was obtained. In this case, the water soluble part played the role of the so called ‘start sugars’. Abbreviations: ASF, alkali soluble fraction; DP, degree of polymerization; EC, energy consumption; HP, high pressure; LMWS, low molecular weight sugars; MC, moisture content; MCC, microcrystalline cellulose; SD, shear deformation, SDHP, shear deformation under high pressure; SS, shear strength; WSF, water soluble fraction This revised version was published online in November 2006 with corrections to the Cover Date.     

Effect of Hyper-Osmotic Stress On Alanine Content of Leishmania Major Promastigotes

ABSTRACT Earlier studies showed that Leishmania major promastigotes are sensitive to osmotic conditions. A reduction in osmolality caused the cells to shorten and to rapidly release most of their large internal pool of alanine. In this study some effects of hyper-osmotic stress were examined. an increase in osmolality of the culture medium from 308 to 625 mOsm/kg caused only a small decrease in growth rate. When cells grown in the usual culture medium (308 mOsm/kg) were washed, resuspended in iso-osmotic buffer, and subjected to acute hyper-osmotic stress by addition of mannitol, the alanine content increased even in the absence of exogenous substrate. Promastigotes, depleted of alanine by a 5-min exposure to hypo-osmotic conditions, also synthesized alanine when resuspended in iso-osmotic buffer. Washed cells resuspended in iso-osmotic buffer consume their internal pool of alanine under aerobic conditions, Rates of consumption decreased on addition of mannitol, becoming zero at about 440 mOsm/kg. At higher osmolalities, alanine synthesis occurred. to estimate whether proteolysis could account for alanine synthesis in the absence of exogenous substrate, cells that had been grown with [1-¹⁴C]leucine were washed and resuspended under hypo-, iso-, and hyper-osmotic conditions and the amounts of ¹⁴CO₂ and ¹⁴C-labelled peptides released in 1 h were measured. Little proteolysis occurred under these conditions, but the possibility that proteolysis was the source of the alanine increase, observed in response to hyper-osmotic stress, cannot be ruled out.     

Water relations of Picea abies. I. Comparison of water relations parameters of spruce shoots examined at the end of the vegetation period and in winter

Seasonal changes of some water relations parameters of Norway spruce shoots ( Picea abies [L.] Karst.) were studied during two experiments using the pressure-volume analysis. For each experiment only shoots of a single tree were used.
During the first study, the course of the turgor loss point (as bulk osmotic pressure when turgor first reaches zero, πp) of shoots developed in late 1986 vegetation period, were measured in 1987. The turgor loss point decreased temporarily from –2.5 MPa at the beginning of the year to –3.3 MPa at the end of March, but then increased to the original level for the rest of the year.
During the second study, water relations parameters were measured in late summer 1987 and in late winter 1988. Winter shoots at full water saturation contained up to 20% less water than in late summer. Accordingly, the bulk osmotic pressure at full water saturation (π_p) decreased from –1.7 MPa in late summer to –1.9 MPa in winter, π_p decreased also from –2.2 MPa to –2.8 MPa. However, the amount of osmotically active substances (mOsmol, N) remained unchanged. The relative amount of apoplastic water in the total shoot water content appeared to drop insignificantly from 17% to 15%.
The results show that the decrease in π_o and π_p in late winter is not due to an accumulation of osmotically active substances in the vacuoles but is due to a decrease in tissue water content. The temporary reduction of the symplastic volume by deposition of osmotically inert substances seems to be the most probable cause of this phenomenon.     

Osmotic relations during elongation growth in hypocotyls of Helianthus annum L.

The relationship between growth, change in cell osmotic pressure and accumulation of osmotic solutes was investigated in hypocotyls of sunflower (Helianthus annum L.) seedlings. During growth in darkness the osmotic pressure decreased by 50% between days 2 and 6 after sowing. After irradiation of dark-grown seedlings with continuous white light (WL) an inhibition of hypocotyl growth was measured, but the osmotic pressure of the growing cells was not lower than in the dark-grown control. Growth in darkness and after WL irradiation was accompanied by an increase in the amount of osmotic substances (soluble sugars) which was proportional to the increase in length of the organ. During growth in continuous WL the cell osmotic pressure decreased by 45 % between days 2 and 6 after sowing. The transfer of WL-grown seedlings to darkness (“re-etiolation”) resulted in a rapid acceleration of hypocotyl growth, but the cell osmotic pressure was the same as that of the WL grown control. Growth in continuous WL was accompanied by a corresponding accumulation of osmotic substances (soluble sugars). The transition from WL to darkness resulted in an enhanced accumulation of osmotica and an increase in cell-wall extensibility. The results indicate that the relative maintenance of cell osmotic pressure during rapid hypocotyl growth in darkness is caused by an enhanced accumulation of soluble sugars into the growing cells of the organ.     

Leveling the playing field: Evaluation of a portable instrument for quantifying balance performance

Balance is a complex, sensorimotor task requiring an individual to maintain the center of gravity within the base of support. Quantifying balance in a reliable and valid manner is essential to evaluating disease progression, aging complications, and injuries in clinical and research settings. Typically, researchers use force plates to track motion of the center of gravity during a variety of tasks. However, limiting factors such as cost, portability, and availability have hindered postural stability evaluation in these settings. This study compared the “gold standard” for assessing postural stability (i.e., the laboratory-grade force plate) to a more affordable and portable assessment tool (i.e., BTrackS balance plate) in healthy young adults. Correlations and Bland-Altman plots between the center of pressure outcome measures derived from these two instruments were produced. Based on the results of this study, the measures attained from the portable balance plate objectively quantified postural stability with high validity on both rigid and compliant surfaces, demonstrated by thirty-five out of thirty-eight observed postural stability metrics in both surface conditions with a correlation of 0.98 or greater. The low cost, portable system performed similarly to the lab-grade force plate indicating the potential for practitioners and researchers to use the BTrackS balance plate as an alternative to the more expensive force plate option for assessing postural stability, whether in the lab setting or in the field.     

Superiority of radiotelemetry over the tail-cuff method in evaluating control and drug-induced data in cardiovascular functions

The aim of the study was to compare an often-used method to measure blood pressure (BP) using a tail-cuff (TC) device, with radiotelemetry (RT) which allows to sample data on heart rate (HR) and BP in freely moving rodents without any restraint in behaviour. Data were collected in male normotensive Wistar-Kyoto rats and in spontaneously hypertensive rats. Experiments were performed under 12:12 h light–dark conditions (lights on at 07:00 h) with simulated dawn and dusk for 45 min. Experiments were performed at 08:00–10:00 h (rest phase) and at 20:00–22:00 h (activity phase) under control conditions and after treatment with the beta-adrenoceptor blocker metoprolol (8 mg/kg). For TC, the Harvard BP Monitoring System (Edenbrigde, England) and for RT radio transmitters (Dataquest IV system, TA11PA-C40, DSI, St. Paul, Minnesota, USA) were used. Rats bearing the TC device were also monitored under RT. The experiments show that TC significantly increased HR and both systolic and diastolic BP in both strains and both at L and D. Metoprolol reduced TC-induced HR but left BP increase uneffected. The study shows that RT is the method of choice to monitor BP and HR in rodents, TC is not suitable.     

Stooping,crouching, and standing – Characterizing balance control strategies across postures

BackgroundWhile stooping and crouching postures are critical for many activities of daily living, little is known about the balance control mechanisms employed during these postures. Accordingly, the purpose of this study was to characterize the mechanisms driving net center of pressure (COP_Net) movement across three postures (standing, stooping, and crouching) and to investigate if control in each posture was influenced by time.MethodsTen young adults performed the three postures for 60 s each. Kinetic signals were collected via a force platform under each foot. To quantify mechanisms of control, correlations (Correl_LR) were calculated between the left and right COP trajectories in the anterior-posterior (AP) and medio-lateral (ML) directions. To examine the potential effects of time on balance control strategies, outcomes during the first 30 s were compared to the last 30 s.ResultsCorrel_LR values did not differ across postures (AP: p = 0.395; ML: p = 0.647). Further, there were no main effects of time on Correl_LR (AP: p = 0.976; ML: p = 0.105). A significant posture-time interaction was observed in the ML direction (p = 0.045) characterized by 35% decreases in Correl_LR over time for stooping (p = 0.022).ConclusionThe dominant controllers of sway (i.e., AP: ankle plantar/dorsi flexors; ML: hip load/unload mechanism) are similar across quiet stance stooping, and crouching. Changes in ML control strategies over time suggests that fatigue could affect prolonged stooping more so than crouching or standing.